Fluid dispensers from FISNAR

Tough, durable, and lightweight these 6, 8, 12 oz, and 1/10 gallon cartridge dispensers are designed for dispensing adhesives and sealants commonly used in industrial assembly, aerospace, and automotive applications. Designed to produce consistent beads and dots in a controlled manner. Their ergonomically balanced design ensures a comfortable fit in the operator

Tough, durable, and lightweight these 6, 8, 12 oz, and 1/10 gallon cartridge dispensers are designed for dispensing adhesives and sealants commonly used in industrial assembly, aerospace, and automotive applications. Designed to produce consistent beads and dots in a controlled manner. Their ergonomically balanced design ensures a comfortable fit in the operator

The dual cartridge dispense system (DCD) is an excellent cost-effective solution for low-volume mixing and dispensing of two-part materials supplied in dual cartridges. The fully portable bench-mounted system is simple to set up and program for accurate two-part dispensing. DCD systems include a pneumatically actuated piston dispenser which applies pressure to accurately dispense materials contained in a dual cartridge.

Fisnar DTD50 is a pneumatically controlled dispense tool for precisely dispensing two component materials packaged into 50 ml A-style and B-style dual cartridges. It can be used with 1:1, 2:1, 4:1, and 10:1 mix ratios. With its simple design and operation, accurate and repeatable fluid deposits are quickly and easily created when connected to a dispense controller.

The dual cartridge dispense system (DCD) is an excellent cost-effective solution for low-volume mixing and dispensing of two-part materials supplied in dual cartridges. The fully portable bench-mounted system is simple to set up and program for accurate two-part dispensing. DCD systems include a pneumatically actuated piston dispenser which applies pressure to accurately dispense materials contained in a dual cartridge.

Tough, durable, and lightweight these 6, 8, 12 oz, and 1/10 gallon cartridge dispensers are designed for dispensing adhesives and sealants commonly used in industrial assembly, aerospace, and automotive applications. Designed to produce consistent beads and dots in a controlled manner. Their ergonomically balanced design ensures a comfortable fit in the operator

Accessory for ATD200C: Autotube Hand Dispenser

Tough, durable, and lightweight these 6, 8, 12 oz, and 1/10 gallon cartridge dispensers are designed for dispensing adhesives and sealants commonly used in industrial assembly, aerospace, and automotive applications. Designed to produce consistent beads and dots in a controlled manner. Their ergonomically balanced design ensures a comfortable fit in the operator

The autotube system is designed to dispense liquids, pastes, greases, silicones, and similar materials directly from the manufacturer

Flow Seal Tip

Flow Seal Tip

Flow Seal Tip

The 580112C Caulking Hand Dispenser is lightweight and comfortable dispensing gun for caulk and sealant fluids dispensing directly from standard caulking cartridges without mess or waste.

Flow Seal Tip

Flow Seal Tip

The JD927 Volumetric Hand Dispenser is lightweight and comfortable with an easy twist-on barrel mounted design. Each squeeze of the trigger advances the plunger by 0.24in (6 mm) dispensing a precise amount of material every time. These dispensers are capable of dispensing most fluids by using a finger-tip control and push button plunger release.

The JD927 Volumetric Hand Dispenser is lightweight and comfortable with an easy twist-on barrel mounted design. Each squeeze of the trigger advances the plunger by 0.24in (6 mm) dispensing a precise amount of material every time. These dispensers are capable of dispensing most fluids by using a finger-tip control and push button plunger release.

The 700PTPCW Pinch Tube Pens are ideal applicators for manually dispensing continuous beads or applying microdots of low viscosity liquids such as solvents and cyanoacrylates. The disposable pinch tube is the only part of the pen that is in contact with the material and discarded when contaminated. The pinch tube pen can be connected via a wide range of interchangeable fittings to gravity fed or pressurized reservoirs.

The dual cartridge dispense system (DCD) is an excellent cost-effective solution for low-volume mixing and dispensing of two-part materials supplied in dual cartridges. The fully portable bench-mounted system is simple to set up and program for accurate two-part dispensing. DCD systems include a pneumatically actuated piston dispenser which applies pressure to accurately dispense materials contained in a dual cartridge.

Hand Dispensing Flow-Seal Pens and Bottles are designed to channel controlled amounts of no-clean flux, RMA, solvents, lubricants, masking, and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip). Flow-seal tips sold separately. *All pens and bottles come supplied with chisel nib 381-8425-AC.

Hand Dispensing Flow-Seal Pens and Bottles are designed to channel controlled amounts of no-clean flux, RMA, solvents, lubricants, masking, and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip). Flow-seal tips sold separately. *All pens and bottles come supplied with chisel nib 381-8425-AC.

Hand Dispensing Flow-Seal Pens and Bottles are designed to channel controlled amounts of no-clean flux, RMA, solvents, lubricants, masking, and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip). Flow-seal tips sold separately. *All pens and bottles come supplied with chisel nib 381-8425-AC.

Hand Dispensing Flow-Seal Pens and Bottles are designed to channel controlled amounts of no-clean flux, RMA, solvents, lubricants, masking, and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip). Flow-seal tips sold separately. *All pens and bottles come supplied with chisel nib 381-8425-AC.