Filter
Adjustable No-Clog Spray Dispensing Valves
Adjustable No-Clog Spray Dispensing Valves
The SV2000N series are no-clog spray valves and work best with low-viscosity materials, typically less than 1000 cps. Material is typically fed to the spray valve from a pressure reservoir. Each valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow, while a separate airline creates pressure in the cap, atomizing the fluid. Valve selection based on required spray area. This spray valve is used in conjunction with the SVC100 controller.

Price on request

Adjustable Stainless Steel Spray Dispensing Valve
Adjustable Stainless Steel Spray Dispensing Valve
The SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1000 cps. It is constructed of stainless steel to prevent corrosion from volatile materials. Designed specifically for spraying flux, paint, oils, lubricants, and coatings for use in coating and marking applications. The flow rate is controlled by turning the stroke adjust at the top of the valve in order to set the spray volume. Coating area and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the component, and the duration the valve is open. This spray valve is used in conjunction with the SVC100 controller.

Price on request

Valve Repair Kit
Accessory for SV2000N: Adjustable No-Clog Spray Dispensing Valves

Price on request

Valve Repair Kit
Accessory for SV1000SS: Adjustable Stainless Steel Spray Dispensing Valve

Price on request

Valve Stand
Accessory for SV1000SS: Adjustable Stainless Steel Spray Dispensing Valve

Price on request