Micro dispensing valves
from FISNAR

The VC1195N is a 4-way valve controller that can be used to control one or two valves simultaneously. The high flow, high speed, internal solenoid rapidly shuts off the dispense valve to prevent drooling and ensures consistent dispense results, by providing a constant air supply to the dispense valve. This ensures it remains in a closed position to prevent premature actuation. For use with 790HP, VDP150, VMS400, VMP30H, VP300, and MV-0180LF dispense valves.

The SV2000N series are no-clog spray valves and work best with low-viscosity materials, typically less than 1000 cps. Material is typically fed to the spray valve from a pressure reservoir. Each valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow, while a separate airline creates pressure in the cap, atomizing the fluid. Valve selection based on required spray area. This spray valve is used in conjunction with the SVC100 controller.

The VDP150 is a pneumatically-operated positive displacement valve designed for dispensing constant volume shots up to 0.15 cc of low to medium viscosity material. Featuring two integral check valves to control the flow of material, the valve is cycled by applying air pressure to the air ports. No fluid pressure is required for low-viscosity materials (less than 5,000 cps) as the material is drawn into the displacement chamber by the plunger.

The VDP100 Adjustable Positive Displacement Dispensing Valve is designed for dispensing constant volume shots of low to medium viscosity materials within 1%, such as oil and grease. The VDP100 valve has a range up to 0.9 cc. The model VC1195N is a suitable 4-way valve controller for the VDP100 double acting metering valve. 4-Way Valve Operation The valve is cycled by applying air pressure to the air ports. Low fluid pressure is required for low to medium viscosity materials. Shot sizes may be fine tuned by turning an adjustment control at the side of the valve.

The SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1000 cps. It is constructed of stainless steel to prevent corrosion from volatile materials. Designed specifically for spraying flux, paint, oils, lubricants, and coatings for use in coating and marking applications. The flow rate is controlled by turning the stroke adjust at the top of the valve in order to set the spray volume. Coating area and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the component, and the duration the valve is open. This spray valve is used in conjunction with the SVC100 controller.

The 790HP-LF high-pressure spool valve offers an effective solution for dispensing high viscosity materials such as silicones, sealants, and grease. A spring snap-back retraction closes the valve resulting in a suck-back at the fluid outlet to prevent dripping.

The CV629 Cartridge Needle Dispensing Valve is a pneumatically-operated valve designed for precision dispensing of low to medium viscosity materials, such as solvents, oils, silicones, UV adhesives, inks, and more. A simple design with accurate delivery.

The PZ-CON piezoelectric valve controller can be configured to independently control up to 4 PZ1200 valves. The pre-fitted driver module(s) uses an amplifier to generate the correct signal wave to actuate and control the piezo elements within the valve ensuring precise dispense control. The built-in memory allows up to 10 individual programs to be created containing a pulse time and sequencing times & frequency. A built in USB connection also allows for programs to be remotely stored. Each controller is supplied with three different user adjustable pulse definition profiles, which is critical when jetting fluid materials in order to minimize fluid build-up on valve seat and unwanted satellites on substrate.

The PZ-CON piezoelectric valve controller can be configured to independently control up to 4 PZ1200 valves. The pre-fitted driver module(s) uses an amplifier to generate the correct signal wave to actuate and control the piezo elements within the valve ensuring precise dispense control. The built-in memory allows up to 10 individual programs to be created containing a pulse time and sequencing times & frequency. A built in USB connection also allows for programs to be remotely stored. Each controller is supplied with three different user adjustable pulse definition profiles, which is critical when jetting fluid materials in order to minimize fluid build-up on valve seat and unwanted satellites on substrate.

The PZ-CON piezoelectric valve controller can be configured to independently control up to 4 PZ1200 valves. The pre-fitted driver module(s) uses an amplifier to generate the correct signal wave to actuate and control the piezo elements within the valve ensuring precise dispense control. The built-in memory allows up to 10 individual programs to be created containing a pulse time and sequencing times & frequency. A built in USB connection also allows for programs to be remotely stored. Each controller is supplied with three different user adjustable pulse definition profiles, which is critical when jetting fluid materials in order to minimize fluid build-up on valve seat and unwanted satellites on substrate.

The PZ-CON piezoelectric valve controller can be configured to independently control up to 4 PZ1200 valves. The pre-fitted driver module(s) uses an amplifier to generate the correct signal wave to actuate and control the piezo elements within the valve ensuring precise dispense control. The built-in memory allows up to 10 individual programs to be created containing a pulse time and sequencing times & frequency. A built in USB connection also allows for programs to be remotely stored. Each controller is supplied with three different user adjustable pulse definition profiles, which is critical when jetting fluid materials in order to minimize fluid build-up on valve seat and unwanted satellites on substrate.

The VC300 is a sophisticated controller able to control the operation of pneumatic dispensing valves with a spring return closing action or air actuated closing action. The internal high speed 5/2 way pneumatic solenoid valve is able to rapidly actuate and shut off the dispense valve to prevent drooling, and achieve consistent and repeatable dispense results. An integrated pressure regulator and gauge offer the added benefit in allowing the controller to control both dispense valve actuation and the fluid pressure of the fluid feed system being supplied to the dispense valve, resulting in a simple and compact valve system setup

Diaphragm valves provide precision micro-shot dispensing of liquids such as cyanoacrylates, solvents, electrolytes, alcohols, and acids. A single-part diaphragm and seal separates the wetted parts for reduced maintenance. The VD510 is a diaphragm valve designed for precise flow control of low to medium viscosity materials. The diaphragm separates the wetted parts from the moving parts, thus making the valve ideal for dispensing cyanoacrylates, anaerobics, reagents, paints, UV adhesives, and other volatile substances.

The VD510 is a diaphragm valve designed for precise flow control of low to medium viscosity materials. The diaphragm separates the wetted parts from the moving parts, thus making the valve ideal for dispensing cyanoacrylates, anaerobics, reagents, paints, UV adhesives, and other volatile substances.

The 710PT-U Pinch Tube Dispensing Valve is engineered for precise control of low to medium viscosity liquids. The easy-to-use stroke control adjustment knob ensures accurate and repeatable dispense volumes. The disposable pinch tube design allows for quick and easy servicing of the valve. Piston on/off actuation causes the pinch tube to open or close allowing material to flow through the valve. The shot size or flow rate is determined by the degree of adjustment in releasing the closed (pinched) tube and by the valve control timer.

The VPP500 Vacuum Pickup System is designed for safely and efficiently picking up and placing delicate lightweight components with ease. Unlike conventional tweezers, the use of a rubber suction cup prevents possible accidental damage or contamination to the component during the lifting and positioning process. Its foot pedal operated electro-pneumatic design minimizes air usage and eliminates the exhausted noise, which is emitted when not in use. Each unit comes with one of the 580046NH-ESD pickup pens included.

MV-0180 Micro Shot Needle Dispensing Valves are designed for precision dispensing of low viscosity fluids from micro shots to moderate-sized beads and dots. Its lightweight, pencil-type grip makes the valve suitable for either handheld or automated applications. Shot size and flow rate are controlled by the tip size, fluid pressure, and the duration that the valve is open.

The VMP30H is a mini-poppet, pneumatic valve designed for dispensing small shots of medium viscosity materials. Its lightweight and compact design is beneficial for installation in confined work areas. The poppet design minimizes surface area and friction between the valve piston and the material, making it ideal for filled materials and extending the life of the valve seals.

The VMS400 is a mini-spool valve designed for dispensing small volumes of medium to high viscosity materials. When air pressure is applied to the air inlet of the valve, the spool will be forced forward and fluid will be dispensed. Shot size and flow rate are controlled by the tip size, fluid pressure, and the duration that the valve is open.

Accessory for PS-V: PosiPump(trade mark) V-Series Progressive Cavity Valve