Product information "Rotary Dispensing Table"
The F1300N rotary table provides an efficient method of dispensing a circular pattern on areas that are difficult to access. The tilting Z-axis allows controlled rotary dispensing on a fixed angle. Used for dispensing adhesives, silicones, grease, and lubricants, the F1300N is fully adjustable in rotation speed, circle diameter and dispensing time. Dispense from barrels, cartridges or valves mounted on the Z-axis. The Z-axis tilt is easily adjusted to dispense either on a vertical wall within a cylindrical part or on an outside wall. The system is fully programmable to control dispense delay, degree of rotation, and wait period before cycling.
|Air Input:||70 - 100 psi (5 - 7 bar)|
|Air Output:||1 - 100 psi (5 - 7 bar)|
|Cycle Initiation:||Manual or Automatic|
|Dimensions (W/D/H):||350 x 482 x 575 mm (13.8 x 19 x 22.6")|
|Rotation Speed:||0 - 60rpm|
|Tool Load:||10 kg (22.0 lb)|
|Weight:||15.5 kg (34.2 lb)|
|Work Load:||2 kg (4.4 lb)|
|Working Area (Diameter):||300 mm (12")|
- Touch screen LCD display for easy set up and operation
- Fully programmable for accurate dispensing
- 9 user programmable memories
- Password-protected operator lock-out mode
- I/O interface